GQ50型鋼筋切斷機

Product

產品展示

產品展示PRODUCT

GQ50型鋼筋切斷機主要技術參數（鋼筋抗拉強度σb≤450Mpa以下）

GQ50 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb≤450Mpa below)

項目/型號Item/Model		GQ50型
切斷鋼筋最大直徑（mm） Maximum Cutting Steel Bar Diameter		φ6-φ50
切螺紋鋼最大規格（mm） Cutting Deformed Steel Bar Diameter	Ⅱ級螺紋鋼 Grade II Thread steel	φ6-φ40（II級螺紋鋼）
	Ⅲ級螺紋鋼 Grade III Thread steel	φ6-φ36（Ⅲ級螺紋鋼）
切刀公稱沖程（mm） Cutting Knife Nominal Stroke		44
連續切斷次數（次/min）Continuous Cutting Off Times		32
電動機型號Motor Model		Y112M-2
電動機功率Motor Power		4.0Kw
額定電壓Rated voltage		380 V±5%
電動機轉速Motor Rotating Speed		2880r/min
外型尺寸（mm）Dimensions		1485×615×740
包裝尺寸（木箱出口型） Package Size(wooden box export)
整機質量The Whole Weight		570±10Kg

GQ50型鋼筋切斷機，適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷，也可用于切斷扁鋼、方鋼、螺紋鋼和角鋼，為您的施工降低大量的人力，大幅提高功效。該機具有以下特點。

1、體積小、結構緊湊、噪音低，沖程大。

2、潤滑性能好：采用箱式封閉結構，齒輪飛濺潤滑（油面應不高于油標刻線，使機器始終處于適當的潤滑狀態）

3、功率損耗少：因潤滑條件的改善，齒輪軸端采用滾動軸承，阻力小，與同類切斷機相比同負載時功率損耗可降低三分之一。

4、移動方便：四輪著地，機動靈活，穩定可靠，維修方便

GQ50 Reinforcing Bar Cutting Machine, is used to cut off all kinds of normal carbon steel, hot rolling bar and deformed steel bar used in concrete, and its biggest advantage is cut off the deformed steel bars. The cross-section of the steel bar end cut by this machine is very parallel and level, which can be directly for threading working. It reduce the worker number and improve the efficiency significantly. This machine has the following characteristise.

1、 Small volume, compact structure, low noise, large stroke.

2、 Lubricating performance: adopt the box-type closed structure, gear spiash lubrication (oil surface should not be higher than standard oil groove, so that the machine is always in a proper lubrication state)

3、 Less power loss: due to the improvement of lubrication condition, gear shaft end uses rolling bearings, the resistance is small,compared with the same kind of cutting machine, the power loss can be reduced by 1/3.

4、 Convenient movement: the four wheels on the ground, flexible, stable and reliable, convrnient maintenance.